You've got the right lights and the right nutrients, but do you have the right humidity? Correct humidity levels are critical to plant health at all stages of growth. With EnviroBoss Dehumidifiers, you can precisely control RH levels throughout the growing process, helping to increase yield and crop consistency and reduce the risk of damage from mold, mildew, and other humidity-related problems.
Proper humidity control in your processing environment can also help you preserve product quality and weight. EnviroBoss offers a wide range of dehumidifiers to bring precision humidity control to your grow operations. You can trust your investment with EnviroBoss—built in the USA by a manufacturer with over 35 years of proven humidity control product success. Manage risk, boost yields, control quality—get everything right in your grow environment with EnviroBoss.
Automation Grow Systems is a hardware and software technology company that uses patent-pending hardware, software, and process control to provide controlled environments for grow facilities. Its systems decrease costs and allow for repeatable and tracked growing processes. The system’s hardware consists of a programmable logic controller, with low voltage switching, and state-of-the-art sensors to report and control cycle management. The software consists of a program code developed specifically for the grow industry. It allows technology to process the complete growing cycle from start to finish. An HMI touchscreen user interface allows for precise control of adjustable parameters, complete reporting, and remote access. Automation Grow Systems—Profit Growth Through Automation.
The Autopilot PPM-5 CO2 Monitor and Controller with Remote Sensor is a simple and affordable way to control a CO₂ injection device. Choose the desired CO₂ parts per million level, and the controller will automatically maintain that specified level. A built-in photocell located on the right side of the sensor automatically deactivates CO₂ injection during the nighttime, and the unit's digital display shows live CO₂ levels. The large, bright, display is green in color, which will not disturb your plants’ photoperiod. A remote sensor, with detachable 16-foot cable, allows for placement close to the plant canopy.
The new Larson Electronics Dimmable 28W LED Tube Lamp is an excellent choice for upgrading existing T8 fluorescent lamp fixtures, as well as a direct replacement for our own LED light fixtures. The LEDT8-28W-V3-D 28W T-series LED bulb T8 fluorescent light fixture can be configured for any T series fluorescent light fixture, and requires no ballast for operation. Power for this four-foot LED tube is single ended. This feature makes the tubes an ideal upgrade for four foot fixtures with failed ballasts. This LED lamp features rotating pins, allowing operators to adjust the direction of light dispersion after installation.
These LED-style replacement lamps are directional and offer a 160-degree beam spread. The polycarbonate lens diffuses the light and the aluminum housing serves as a heat sink and provides rigidity and strength for this LED bulb. These LED fluorescent style bulbs are universal voltage and run directly off any voltage ranging from 100V to 277V AC 50/60Hz.
SoHum Living Soils Potting Mix is a fully amended potting mix that contains no artificial components and requires none of the artificial chemical additives to spur growth. This mix is biodynamic, meaning each bag contains an ecosystem of beneficial bacteria and fungi to directly impact plant development, emphasizing a natural approach to growing. SoHum contains a full buffet of macro and micronutrients pre-amended into the potting mix for maximum nutrient uptake—for the entire life cycle of your plant.
This mix helps your plants achieve their genetic potential while reducing labor, time and cost spent on your garden. There is no need to pH your medium or second-guess testing kits, just add water and grow. Enjoy consistent yields and naturally enhanced flavor with SoHum Soils.
The Convertible Smart Volt Dual Ferrite Power Cord is one cord that does double duty for 120, 208, or 240V ballasts. This innovation is long overdue and was designed for use with ultra-low RFI (Radio Frequency Interference) emission Galaxy Ballasts. This dual ferrite noise-dampening cord may be used with other products. RFI dampening ability will vary based on the ballast used. Cord sets include detachable 120V and 240V plugs which provide the capability to easily convert the cord into either a 120V or 240V power cord in seconds. The cord is 6.5 feet long. Sunlight Supply makes no claims related to ballast compliance if this cord is used with other electronic ballast brands other than Galaxy ballasts.
Grower's Choice is proud to introduce its new Digital 315W ceramic metal halide complete fixture. Utilizing cutting-edge 50/60Hz low frequency square-wave technology, this fixture can maintain lumen output higher than 95 per cent at over 30,000 hours while maintaining the initial spectrum, ensuring both reliability and efficiency.
The Grower’s Choice CMH fixture is capable of operating at either 120V or 240V, making it ideal for home and commercial applications. Its Smart-Dim technology allows growers to dim and super-charge the lamp depending on the grower’s specific needs. Grower’s Choice offers the broadest range of 315W lamps, including the 3100K Full Phase, 3100K-R Red Enhanced, 4200K Day Light, and 10,000K finishing.